Boiler rooms at high rise apartment buildings are vulnerable to theft, vandalism, flood and equipment outage. The Boiler System is your most valuable asset. Loss of heat and hot water can be devastating to your residents. ACI has addressed these concerns with "The Boiler Watch System" that covers all bases with early warning notification of an impending emergency. At the protected space an alarm panel key pad programmable, will prevent access by unauthorized persons. Water and flood detectors will be placed strategically throughout the space. Smoke and carbon monoxide detectors will protect against fire and fumes. Sensors for boiler outage, boiler on safety and equipment failure will be interfaced to the system. A local system can be installed with siren sounding outside the space.

Boiler Watch System to Annunciator

Annunciator panel with midrange wireless notification located at the Superintendent Work Station or Doorman Station with zone lights shall alert of an impending emergency at the designated space (up to eight zones) installed.

Boiler Watch Mid-Range Wireless Transmitter

Mid range wireless transmitter single channel - range 1 mile open air interfaced to a Boiler Watch. Signals are sent to 8 Zone annunciator panel for immediate notification.

Boiler Watch Mid Range Wireless Receiver

The mid range receiver receives signals from up to 8 Boiler Watch systems and interfaces to the 8 channel annunciator.

Boiler Watch Radio Alarm Transmitter

Wireless transmitter connects to Boiler Watch or any other alarm point and sends signals up to 30 miles in open air.
These units are a new generation of advanced and high performance Radio Alarm Transmitter end units, compatible with all LARS Long Range Audio Alarm Systems. Manufactured using the latest SMD technology, the ATS100 is synthesized, with units available for both VHF and UHF frequencies.

  Features

• Synthesized VHF and UHF units
• Compact and easy to install
• Serial Port for parameter programming on-site
• Interfaces with any alarm panel for transfer of up to 256 different messages
• Programmable periodic test messages

Central Station Receiver

By interfacing a long range wireless transmitter to each Boiler Watch System unit, signals can be transmitted to the Central Station located in the Security Office. The Central Station receiver micro-processor is totally wireless, and can be interfaced with your computers and central pagers. Information can be transported to remote sites via modem. Once the Central Station is set up at your facility, wireless detection devices can be located throughout the complex, and report by zone to the central processor. The Central Station can handle in excess of 8,000 alarm locations.

Central Station Automation

The Central Station receiver has a built-in LED display and printer port. Alarm codes are alpha-numeric, and a cross-reference chart must be used to pinpoint the breached location. If the system is automated, the exact area being breached will be depicted on your computer screen and documented by a print-out. The Automated Central Station includes a Pentium PC with 20 GIG hard disc 64 megabytes of RAM, keyboard, 17" monitor, dot matrix printer, and alarm based management software. The system also includes a paging interface with local area paging equipment for alpha-numeric pagers.